Browse the database of questions and answers on a variety of products and technologies.
Table of Contents
Alarm (Screen)
Alarms
- ALARM #1 – UNLOAD PRESSURE SWITCH (A01)
- ALARM #2 – OUT OF WET GRAIN (A02)
- ALARM #3 – METERING SYSTEM FAULT (A03)
- ALARM #4 – HIGH MID GRAIN TEMPERATURE (A04)
- ALARM #5 – DIRTY HEAT ZONE SCREENS (A05)
- ALARM #6 – MAXON FAIL TO ACTIVATE (A06)
- ALARM #8 – PILOT FAIL (A08)
- ALARM #9 – PREMATURE FLAME DETECTED (A09)
- ALARM #10 – PREMATURE MAXON ACTIVATION (A10)
- ALARM #11 – PLENUM TEMPERATURE DEVIATION HIGH (A11)
- ALARM #12 – PLENUM TEMPERATURE DEVIATION LOW (A12)
- ALARM #13 – PLENUM FAIL TO REACH TEMPERATURE (A13)
- ALARM #14 – UNLOAD FAIL TO START (A14)
- ALARM #15 – DOOR SWITCH OPEN (A15)
- ALARM #16 – UPPER HIGH LIMIT (A16)
- ALARM #17 – LOWER HIGH LIMIT (A17)
- ALARM #18 – LINEAR LIMIT (A18)
- ALARM #19 – DISCHARGE DRIVE OVERLOAD (A19)
- ALARM #20 – CUSTOMER OVERLOAD INTERLOCK (A20)
- ALARM #21 – FAN #1 OVERLOAD (A21)
- ALARM #22 – FAN #2 OVERLOAD (A22)
- ALARM #23 – FAN #3 OVERLOAD (A23)
- ALARM #24 – FAN #4 OVERLOAD (A24)
- ALARM #25 – MAXIMUM PLENUM TEMPERATURE (A25)
- ALARM #27 – AIR PRESSURE SENSOR FAULT (A27)
- ALARM #29 – DM INLET MOISTURE CRITICAL (A29)
- ALARM #30 – DM INLET MOISTURE WARNING (A30)
- ALARM #31 – DM OUTLET MOISTURE CRITICAL (A31)
- ALARM #32 – DM OUTLET MOISTURE WARNING (A32)
- ALARM #33 – DM INLET TEMPERATURE CRITICAL (A33)
- ALARM #34 – DM INLET TEMPERATURE WARNING (A34)
- ALARM #35 – DM OUTLET TEMPERATURE CRITICAL (A35)
- ALARM #36 – DM OUTLET TEMPERATURE WARNING (A36)
- ALARM #37 – DM DISCHARGE RATE CRITICAL (A37)
- ALARM #38 – DM DISCHARGE RATE WARNING (A38)
- ALARM #39 – DM BURNER TEMPERATURE CRITICAL (A39)
- ALARM #40 – DM BURNER TEMPERATURE WARNING (A40)
- ALARM #41 – WET FILL OVERLOAD (A41)
- ALARM #42– LOW GAS PRESSURE (A42)
- ALARM #43– HIGH GAS PRESSURE (A43)
- ALARM #44 – LINEAR LIMIT UPPER LEFT (A44)
- ALARM #45 – LINEAR LIMIT UPPER RIGHT (A45)
- ALARM #46 – LINEAR LIMIT MIDDLE LEFT (A46)
- ALARM #47 – LINEAR LIMIT MIDDLE RIGHT (A47)
- ALARM #48 – LINEAR LIMIT LOWER LEFT (A48)
- ALARM #49– LINEAR LIMIT LOWER RIGHT (A49)
- ALARM #50 – LINEAR LIMIT INNEAR LEFT (A50)
- ALARM #51 – LINEAR LIMIT INNER RIGHT (A51)
- ALARM #53 – TAKEAWAY OVERLOAD (A53)
- ALARM #56 – FAN #1 AIR SWITCH (A56)
- ALARM #57 – FAN #2 AIR SWITCH (A57)
- ALARM #58 – FAN #3 AIR SWITCH (A58)
- ALARM #59 – FAN #1 FAIL TO START (A59)
- ALARM #60 – FAN #2 FAIL TO START (A60)
- ALARM #61 – FAN #3 FAIL TO START (A61)
- ALARM #62 – STOP BUTTON PRESSED (A62)
- ALARM #63 – AIR PRESSURE HIGH (A63)
- ALARM #64 – AIR PRESSURE LOW ALARM (A64)
- ALARM #65 – AIR PRESSURE LOW WARNING (A65)
- ALARM #66 – LINEAR LIMIT #1 FROM BOTTOM (A66)
- ALARM #67 – LINEAR LIMIT #2 FROM BOTTOM (A67)
- ALARM #68 – LINEAR LIMIT #3 FROM BOTTOM (A68)
- ALARM #69 – LINEAR LIMIT #4 FROM BOTTOM (A69)
- ALARM #70 – FAN #4 FAIL TO START (A70)
- ALARM #71 – TRI-START OVERLOAD (A71)
- ALARM #72 – FAN #4 AIR SWITCH (A72)
- ALARM #73 – LINEAR LIMIT UPPER (A73)
- ALARM #74 – LINEAR LIMIT MIDDLE (A74)
- ALARM #55 – LINEAR LIMIT MIDDLE LEFT (A55)??
- ALARM #75 – LINEAR LIMIT LOWER (A75)
- ALARM #76 – LINEAR LIMIT INNER (A76)
- ALARM #77 – LINEAR LIMIT OUTER (A77)
Auto Starting (Screen)
Burner Systems (Screen)
DryerMaster (Screen)
Fan System (Screen)
Fill Systems (Screen)
Input Sensor Calibration (Screen)
Manual Start (Screen)
Outlet Sensor Calibration (Screen)
Platinum + (Screen)
Prestart Conditions Manual (Screen)
Safety Circuit (Screen)
Settings (Screen)
Temp+ (Screen)
Timers (Screen)
Trends (Screen)
Unload Systems (Screen)
Custom Agri Systems, Inc.
255 Co. Rd. R.
Napoleon, Ohio 43545
Phone 419-599-5180
Phone (800) 592-1434
Fax: 419-592-5180
Email: customag@casindustries.com